TATM Graduate Handbook
- Welcome
- TATM Graduate Student Expectations and Learning Outcomes
- TATM Graduate Degrees
- Academic Administrative Information
- Financial Support
- Faculty Research
- Student Organizations
- Related Professional Organizations
- Graduate Program Contacts
- Appendix A: Master’s Program Timeline of Key Requirements
- Appendix B: TATM Graduate Degree Related Course Offerings
- Appendix C: Research Interests of TATM Graduate Faculty
Welcome
Welcome to the Department of Textile and Apparel, Technology and Management (TATM) in the Wilson College of Textiles at NC State University. We are excited to have you here and know that you will have the opportunity to study with faculty recognized nationally and internationally for their expertise.
The Wilson College of Textiles, being the global leader in higher education in textiles and apparel, provides tremendous resources to facilitate your research and academic pursuits. As a research- intensive land-grant university, NC State University is dedicated to excellent teaching, the creation and application of knowledge, and engagement with public and private partners. We hope that you will take full advantage of the resources we provide as you progress through the graduate program, and you can expect us to challenge and support you through your degree program.
With your passion for the textile, apparel, and related industries, you can choose to focus your graduate study in one of the following areas of specialization:
The Textile and Fashion Design specialization combines aesthetic, functional, technical and expressive approaches utilizing cutting-edge technologies and traditional design sensitivities. Students have access to the newest fibers, fabrics and processes to create innovative textiles, fashions and related products.
The Retail and Brand Management specialization focuses on marketing and management in the textile and apparel industry and includes marketing research, consumer behavior analysis, entrepreneurship, and global brand management in textiles and apparel.
The Textile Technology specialization develops the students’ potential for research and skills needed for the technical perspective of textile structures and their products, including automotive, medical textiles, industrial fabrics, three-dimensional textiles, aerospace applications, and smart textiles.
The Textile Management specialization focuses on management issues in the textile industry and includes strategic textile management, quality management, technology management and international management.
In addition to the state-of-the-art facilities and diverse faculty expertise, the department maintains extensive networks with the textile and apparel industry. Global industry and government executives actively participate in our vision to be a global leader in higher education in textiles.
Again, welcome to TATM! We wish you the best and look forward to working with you to achieve your academic goals during your graduate education journey.
Abdel-Fattah M. Seyam, Ph.D. Charles A. Cannon Professor of Textiles
Lisa Chapman, Ph.D. Professor and Director of Graduate Programs
TATM Graduate Student Expectations and Learning Outcomes
With state-of-the-art facilities and nationally and internationally recognized faculty, the TATM graduate programs provide students with a thorough understanding of the science, technology, and management principles and the ability to identify and solve challenging technological and managerial problems in the textile and apparel industry. Building on the strength of NC State University and our global industry partners, our programs are designed to prepare global leaders for managerial and leadership positions in industry, businesses, higher education, and non-profit organizations.
Upon successful completion of the graduate program, TATM graduates will be able to:
- Assimilate, integrate and evaluate scholarship in the multidisciplinary field;
- Understand the research methods, ethical dimensions and historical knowledge bases of the discipline;
- Understand new knowledge in the chosen field and apply that knowledge to new problems/issues;
- Develop expertise and conduct independent research in specific areas of discipline;
- Assess the impact of current trends and develop industry forecasting ;
- Develop and expand creative thinking skills; and
- Make strategic and ethical decisions.
The TATM graduate faculty expects the following of TATM graduate students to reach their expected learning outcomes:
- To exhibit a good work ethic, be self-directed and motivated;
- To work responsibly toward completion of the degree in a timely fashion;
- To communicate regularly with faculty mentors and the thesis committee members, especially in matters relating to research and progress within the degree program;
- To exercise the highest integrity in all aspects of work, especially in the tasks of collecting, analyzing, and presenting research data;
- To critique current concepts and generate independent interpretations;
- To be professional in interaction with peers, students, staff and faculty;
- To contribute, wherever possible, to the discourse of the scholarly discipline through conference presentations, publications, collaborative projects, and other means; and
- To realize responsibilities as individual and professional representative of both the TATM department and the university as a whole.
TATM Graduate Degrees
The Department of Textile and Apparel, Technology and Management (TATM) offers the following two degrees:
- Master of Science in Textiles (M.S.)
- On-campus only
- Master of Textiles (M.T.)
- On-campus or distance education
The thesis-based M.S. option emphasizes the development of the skills necessary to create, plan and carry out independent research. The non-thesis M.T. option offers preparation and career advancement for students with interests in the design, management and technological perspective of the textile industry.
Students can choose to focus their degree in one of the following areas of specializations:
- Textile and Fashion Design,
- Retail and Brand Management,
- Textile Technology, or
- Textile Management
The Textile and Fashion Design specialization combines aesthetic, functional, technical and expressive approaches utilizing cutting-edge technologies and traditional design sensitivities. Students have access to the newest fibers, fabrics and processes to create innovative textiles, fashions and related products.
The Retail and Brand Management specialization focuses on marketing and management in the textile and apparel industry and includes marketing research, consumer behavior, entrepreneurship, and global brand management in textiles and apparel.
The Textile Technology specialization develops the students’ potential for research and skills needed for the technical perspective of textile structures and their products, including automotive, medical textiles, industrial fabrics, three-dimensional textiles, aerospace applications, and smart textiles.
The Textile Management specialization focuses on management issues in the textile industry and includes strategic textile management, quality management, technology management and international management.
TATM Degree Requirements
Plan of Work (POW)
All graduate students must develop and submit a Plan of Work (POW) via MyPack Portal. The POW identifies the graduate faculty that will be mentoring the student’s academic progress and the course work to be taken for the degree.
Should there be any changes after the original POW is submitted, for either M.S. or M.T. students, a revised POW must be submitted. It is essential that students discuss any changes with the advisor/committee before requesting any changes to the POW. The changes on the POW must be resubmitted for approvals using the same procedure as the original POW.
M.S. Students | Plan of Work
The POW must be submitted by the end of the second semester and include a list of the course work to be undertaken and the thesis committee members. The POW is to be developed by the student in conjunction with their advisor and/or thesis committee and then approved by the advisor and thesis committee, the TATM Director of Graduate Programs (DGP) and the Graduate School.
M.T. Students | Plan of Work
The POW must be submitted by the end of their first semester and include a list of the coursework to be undertaken and the academic advisor. The POW is to be developed by the student in conjunction with their advisor, be approved by the advisor, the TATM Director of Graduate Programs and the Graduate School.
Accelerated Bachelor’s/Master’s (ABM) Students | Plan of Work
ABM students should already have a Plan of Work on file to get into the program. Should you need to modify your Plan of Work, please work closely with your committee chair (M.S.) or advisor (M.T.).
Read more about the ABM program.
Degree Requirements
Degree Requirements for Master of Science in Textiles (M.S.)
The objective of the thesis-based Master of Science in Textiles (M.S.) is to prepare students for careers that require independent research skills, including creating, planning and carrying out research projects. Students interested in continuing with a Ph.D. in Textile Technology Management (TTM) or Fiber and Polymer Science (FPS) are also encouraged to pursue the M.S. degree. The M.S. degree requires a minimum of 36 hours including a thesis and typically takes two (2) years to complete. Please see Appendix A for the degree timeline.
M.S. Degree Requirements:
- Students should form a thesis committee and have an approved Plan of Work (POW) by the end of the second semester (for full-time students).
- Thesis committee composition:
- A minimum of three NC State Graduate Faculty members;
- The committee chair must be a graduate faculty member in TATM; and
- If the student has a minor, one committee member needs to represent the minor.
- Students must successfully pass the thesis defense to graduate.
- A minimum of 36 credit hours are required to earn the degree.
- A maximum of 12 credit hours of relevant courses (500 or above) taken as non-degree studies (NDS) may be included in the program with the approval of the student’s thesis committee.
- Two (2) credit hours of TTM 601 (graduate seminar) are required for the degree. No more than two (2) hours of TTM 601 count toward the degree.
- A total of 6-10 credit hours of 600 level courses [TT/TTM 630 (max of 6 credit hours), 693, 695] in the major for research and independent study can count towards the degree.
- A maximum of nine (9) credit hours of supporting coursework from outside the department are allowed to count towards the degree. This may be increased to a maximum of 12 hours for students taking six (6) credit hour classes in the College of Design.
- All course work toward the degree must be at the 500 level or above. However, up to three (3) credit hours of advanced undergraduate 400 level coursework from outside of the department may be allowed on the Plan of Work.
- Each specialization requires a minimum of 15 credit hours of TT/TTM course work at the 500 or 700 levels.
- If a minor is selected, a minimum of nine (9) hours must be taken in the minor area and nine (9) hours are counted toward the degree requirement.
- The degree must be completed within six (6) years of the date of the first course completed that is on the Plan of Work. Students must be continuously enrolled once they begin their graduate program. Students may request a leave of absence from the program for one (1) semester at a time; two (2) semesters maximum.
- Graduate students must maintain a minimum 3.0 GPA to remain in the program and have a minimum 3.0 GPA at the time of graduation. (Please see Academic Standing in this handbook for more details.)
Degree Requirements for Master of Textiles (M.T.)
The objective of the non-thesis based Master of Textiles (M.T.) is to provide preparation and career advancement for students with interests in the design, management, and technical perspective of the textile industry. The program is flexible to accommodate a breadth of student needs. The program can be completed in only two (2) semesters (1 year) of full-time on campus study or up to a maximum of six (6) years through distance education. The program is also available entirely via distance education and may be completed on a part-time basis.
The degree requires a minimum of 30 credit hours. Please see Appendix A for the degree timeline.
M.T. Degree Requirements:
- Students must work with an advisor throughout the program. No graduate committee is required.
- Students must submit a Plan of Work (POW) by the end of their first semester.
- A minimum of 30 credit hours is required to complete the degree.
- A maximum of six (6) credit hours independent study courses, TT/TTM 630/632, are allowed to count towards the degree.
- A maximum of 12 credit hours of relevant courses taken as non-degree studies (NDS) may be included in the program with the approval of the student’s advisor.
- TTM 601 (Graduate Seminar) is not required for the degree. Students are allowed to take TTM 601, but no more than two (2) credit hours of TTM 601 count toward the degree.
- No minor can be declared.
- Nine (9) credit hours of supporting coursework from outside the department are allowed on the Plan of Work. This may be increased to 12 hours for students taking six (6) credit hour classes in the College of Design.
- All course work must be at the 500 level or above. However, up to three (3) credit hours of advanced undergraduate 400 level coursework from outside of the department may be allowed on the Plan of Work.
- The degree must be completed within six (6) years of the date of the first course included in the Plan of Work. Students must be continuously enrolled once they begin their graduate program. Students may request a leave of absence from the program for one (1) semester at a time; two (2) semesters maximum.
- Graduate students must maintain a minimum 3.0 GPA to remain in the program and must have a 3.0 GPA or higher at the time of graduation. (Please see Academic Standing in this handbook for more details).
Recommended Courses in Specialized Areas*
Textile and Fashion Design
- TT 551 – Advanced Woven Fabric Design and Structures
- TT 570 – Textile Digital Design and Technology
- TT 571 – Professional Practices in Textile Design and Technology
- TTM 510 – Apparel Technology Management
- TTM 515 – Apparel Production
- TTM 517 – Advanced Computer-Aided-Design for Fashion
- TTM 573 – Management of Textile Product Development
- TT/TTM 591 – Special Studies
- TT/TTM 630 – Independent Study
- TT/TTM 632 – Special Studies in Textile Product Development
- TT/TTM 676 – Special Projects
Retail and Brand Management
- TTM 561 – Strategic Technology Management in the Textile Complex
- TTM 573 – Management of Textile Product Development
- TTM 581 – Global Textile and Apparel Business Dynamics
- TTM 582 – Global Textile Brand Management and Marketing
- TTM 583 – Strategic Planning for Textile Firms
- TTM 585 – Market Research in Textiles
- TTM 588 – Global Perspectives in Textile Supply Chain Management
- TT/TTM 591 – Special Studies
- TT/TTM 630 – Independent Study
- TT/TTM 676 – Special Projects
Textile Technology
- TT 504 – Introduction to Nonwovens Processes and Products
- TT 520 – Yarn Processing Dynamics
- TT 530 – Textile Quality and Process Control
- TT 541 – Theory and Practice Of Knitted Fabric Production and Control
- TT 550 – Production Mechanics and Properties of Woven Fabrics
- TT 551 – Advance Woven Fabric Design and Structures
- TT/TTM 591 – Special Studies
- TT/TTM 630 – Independent Study
- TT/TTM 676 – Special Projects
Textile Management
- TTM 530 – Textile Quality and Process Control
- TTM 533 – Lean Six Sigma Quality
- TTM 535 – Research Methods and Management (Master of Science only)
- TTM 561 – Strategic Technology Management in the Textile Complex
- TTM 581 – Global Textile and Apparel Business Dynamics
- TTM 583 – Strategic Planning for Textile Firms
- TTM 501 – Textile Enterprise Integration
- TTM 591 – Special Studies
- TTM 630 – Independent Study
*Note:
1. Not all courses are offered every semester and/or may be canceled due to low student enrollment. For a complete listing of current course offerings, see Registration and Records.
2. See Appendix B for a list of all TT and TTM graduate level courses.
Academic Administrative Information
All graduate students are governed by the academic policies of the Graduate Handbook by the NC State Graduate School.
Course Registration
- Course registration is through MyPack Portal. You will need to log in to start the registration process. You can learn how to use MyPack Portal to register for courses using this tutorial.
- You must meet with your advisor regarding your course plan before you can register. After your advising meeting, you advisor will release the advising hold for you.
- The Director of Graduate Programs (DGP) in Textile and Apparel, Technology and Management (TATM), Dr. Lisa Chapman (Lisa_Chapman@ncsu.edu), will be your initial faculty advisor when you begin the program. You should request a permanent faculty advisor by the end of your first semester that shares your research interests.
- All students MUST register each semester by the census (drop/add) date.
Registration Policy
- Must be registered in class(es) each semester or request a Leave of Absence: .
- Leave of absences are only granted for a maximum of two (2) semesters or one (1) year total. Read more.
- 9+ credit hours is considered full-time with a max of 15 per semester (if approved by the department).
- Below nine (9) hours is considered half or quarter-time (students on financial aid should review registration requirements. Also, international students should review immigration policies concerning full- and half-time enrollment status.
- International students, in their last semester, may take one (1) credit hour if they submit a reduction in course load waiver form to the Office of International Services.
- If you plan to withdraw from the program, you must get approval from the home department and the university Counseling Center.
- Must maintain at least a 3.0 cumulative Grade Point Average (GPA) in all course work. Read more.
Holds
Holds can be placed on a student’s record for several reasons. Most commonly, these include departmental deficiencies, immunization requirements, disciplinary reasons, financial encumbrance to the university, lack of academic progress, failure to submit transcripts, or low GPA. Holds may prohibit the student from making changes to their registration, from receiving a transcript, or from graduating. Holds will appear in the registration section of a student’s profile in self-service.
Changing Degrees/Programs
- Students must remain in their original degree program for one semester before they can change curriculums. See full guidelines.
- Students must submit a degree change form to their home department’s director of graduate programs (DGP) for approval.
- In cases where the student requests a departmental change, DGPs for each department must approve the degree change form.
- Students must be in good academic standing (have a 3.0 GPA or above, have met all provisions, etc.) to request a degree/program change.
- Students must be registered for the semester in which they are requesting the degree change.
- If you have already submitted a Plan of Work for the current degree program, a new work plan must be created for the new degree program.
- International students should review immigration policies concerning changing degree programs.
Plan of Work (POW)
- Choose a research topic as soon as possible (M.S. students);
- Choose a committee chair (M.T. does not require a committee, only chair) by the end of the first semester and committee members by the end of the second semester. Read more.
- Work with committee chair and/or committee to develop the Plan of Work;
- Plan of Work should be submitted by the end of the first semester (M.T.) or second semester (M.S.) in MyPack Portal
- Please remember that this is a work “plan.” Some courses will not be offered every semester or may conflict with another course on your schedule. Most POWs have to be altered during the degree program. If your POW remains unsubmitted, “pending” or “denied,” it can create deadline problems for graduation in your final semester. You can look under the “comments” tab if your Plan of Work has not been approved to see what corrections are needed.
Thesis Defense and Graduation (M.S. Students)
- Work with your committee chair (advisor) to identify a research topic by the end of the first semester.
- Start working on the thesis project as early as possible (recommended to start at the beginning of the second semester).
- Complete the thesis project under the direction of your committee chair and in consultation with your thesis committee.
- Successfully complete the coursework per the Plan of Work.
- Apply to graduate on MyPack Portal by the deadline.
- Review with your committee chair(s) before scheduling a defense date.
- Schedule a defense date with all of your committee members. Keep in mind that you must defend by a certain date in each semester to be considered a graduate of that semester (typically by the end of March and October).
- Submit the request to schedule master’s oral examination form through the department at least two (2) weeks prior to the oral exam date.
- Give copies of your thesis to the committee at least two weeks prior to the oral exam (thesis defense) date.
- Unconditionally pass the oral exam (thesis defense).
- Submit the thesis to thesis editor within 24 hours of the exam.
- Submission of a thesis to the Graduate School must take place at least four (4) weeks prior to the last day of classes in the semester or summer session in which the degree is to be conferred. Specific deadline dates are published at least one year in advance on the Graduate School website.
- There is an additional deadline each semester as follows:
- Deadline to graduate but not to register for a semester. Student must pass the final oral exam unconditionally, or pass conditionally and clear the conditions, and also have the thesis review with the thesis editor by the last working day before the first day of class for that semester. If they do so, the student avoids registering for that semester or paying tuition for that semester.
- International students should reconfirm their visa status with the Office of International Services.
- The Graduate School will not authorize the release of the diploma to the student or inclusion of the statement of award of the degree on the permanent records from which transcripts are made until these forms and fees have been completed and returned to the Graduate School.
Graduation (M.T. Students)
- Successfully complete the coursework per the Plan of Work.
- Apply to graduate on MyPack Portal by the deadline.
Academic Standing
A notice of academic warning is issued to graduate students who have accumulated fewer than nine (9) hours of coursework and have less than a 3.0 GPA. Graduate students are placed on academic probation if they accumulate 9-18 credit hours and have a grade point average of less than 3.0. A student’s graduate program is terminated if 18 or more credit hours are accumulated with a GPA of less than 3.0. In the latter case, no further registration in a graduate classification will be permitted. Under special circumstances a student will be reinstated upon the written recommendation of the director of graduate programs (DGP) and approval by the Graduate School. Furthermore, the department has the prerogative of recommending the termination of a student’s graduate admission at any time.
If a student receives a notice of “Graduate Admission Terminated” at the end of the first summer session, the student may register for the second summer session unless the department recommends otherwise. A student who receives such a note should confer with the DGP before registering for the second summer session. Once admitted, a graduate student must maintain a “B” or better average to remain eligible for appointment to an assistantship, fellowship or traineeship and must be registered each semester during which the appointment is in effect.
Financial Support
Financial support in the form of research assistantships or teaching assistantships may be available for full-time M.S. students who apply early. International students who seek funding must acquire this through individual faculty members who have research projects that can support a graduate student. While international students might find support by their second semester, they should be prepared to cover all expenses for the first and second semester at least. The Graduate Student Support Plan (GSSP) is used to attract top students to NC State. Under the plan, students supported on a teaching or research assistantship or a fellowship receive health insurance benefits and tuition support. Please see the NC State Graduate Student Support Plan for more information.
- Funded students should adhere to their Terms and Conditions contract. If/when funded, students must sign the contract attached to the offer letter.
- Funded students should also be aware of their benefits (tuition, health insurance, etc.) eligibility through the Graduate Student Support Plan (GSSP).
- Max. 20 hours/week (half time appointment) on Teaching/Research.
- Half-time Appointment: 9 credit hours/semester (min/max).
Faculty Research
The TATM faculty maintain very active research programs. The faculty in the department have a very diverse research expertise from fiber structure, fabric treatment, textile and fashion design, production and manufacturing management, supply chain management, quality control, market analysis, brand management, and retailing and merchandising. A list of faculty research interests is attached in Appendix C. Please review this information and feel free to reach out to the faculty members with whom you would like to work, or seek advice.
Student Organizations
- Textile Association of Graduate Students (TAGS)
- NC State University Graduate Student Association (UGSA)
- AATCC NC State Student Chapter
- African American Textile Society (AATS)
- Fashion Group of the Wilson College of Textiles (FG)
Related Professional Organizations
- International Textile and Apparel Association (ITAA)
- International Foundation of Fashion Technology Institutes (IFFTI)
- American Association of Family and Consumer Science (AAFCS)
- American Collegiate Retailing Association (ACRA)
- National Retail Federation (NRF)
- American Apparel and Footwear Association (AAFA)
- American Association of Textile Chemists and Colorists (AATCC)
- Association of the Nonwoven Fabric Industry (INDA)
- Costume Society of America (CSA)
- Industrial Fabrics Association International (IFAI)
- ASTM International
Graduate Contacts
Dr. Lisa Chapman
Director of Graduate Programs
Room 3255, Wilson College of Textiles
919.513.4020
llparril@ncsu.edu
Robert Cooper
Graduate Services Coordinator
Room 3250A, Wilson College of Textiles
919.515.6632
robert_cooper@ncsu.edu
Appendix A: Master’s Program Timeline of Key Requirements
Acceptance to the TATM Graduate Program
| Required Action | Deadline | Who Initiates | Submit to |
|---|---|---|---|
| Complete online acceptance | ASAP upon receipt | Prospective student | Done online through application portal |
Arrival at NC State and Prior to Start of Fall Semester
| Required Action | Deadline | Who Initiates | Submit to |
|---|---|---|---|
| Make an appointment online and Visit Office of International Services (OIS) with Passport and I-20 | Immediately upon arrival at NC State | International students only | |
| Submit hard copy proof of immunizations | Within 30 days of your acceptance at NC State | International students only | Immunizations Department |
| Attend OIS Orientation, Graduate School Orientation, TATM Graduate Student Orientation | Students will receive date, time, and location information via email. | The Graduate School and the DGP of TATM | |
| For U.S. students only: Complete residency requirements (but do not submit residency requirement form until end of second semester). | Important! Within the first 10 days of classes | Students who are U.S. Citizens or have permanent resident status | After completing the requirements, contact to ensure your application will be accepted |
1st Year of Graduate School
| Required Action | Deadline | Who Initiates | Submit to |
|---|---|---|---|
| Students whose previous degree programs were not complete at the time of application are required to submit official transcripts showing degree(s) awarded and date(s). | Before the end of first semester of registration | Student | The Graduate School |
| M.S.: Establish Advisory Committee and Submit Plan of Work via MyPack Portal M.T.: Identify advisor and Submit Plan of Work via MyPack Portal | Before end of second semester of coursework | Student and Advisor | The Graduate School |
| Important! Submit North Carolina Residency application. | Between 14 and 75 days prior to the beginning of the student’s third semester of classes | Student | The Graduate School |
| Attend Graduate School Electronic Thesis and Dissertation Workshop | By the end of Year 1 | Student (M.S.) | The Graduate School |
2nd Year of Graduate School
| Required Action | Deadline | Who Initiates | Submit to |
|---|---|---|---|
| Check that your Plan of Work is approved and submit a “Request to Graduate” via MyPack Portal | Fourth Semester. Due dates for each semester are posted on the ETD Deadlines page | Student (M.S.) | The Graduate School |
| Apply for Graduation via MyPackPortal | By the end of March/October. Exact date for each year to be determined by the graduate school. | Students (M.T.) | The Graduate School |
| Submit thesis draft to Advisory Committee | At least two weeks prior to final oral exam | Student (M.S.) | Advisory Committee |
| Schedule final oral exam with Advisory Committee | Semester of expected graduation, at least 14 working days prior to proposed exam date | Student (M.S.) | Graduate Program Secretary |
| Electronically submit draft of thesis for review | Within 24 hours of passing the final oral exam | Student (M.S.) | Contact Thesis Editor |
| Revise thesis per Advisory Committee requirements and submit final thesis | Due dates for each semester are posted on the ETD Deadlines page | Student (M.S.) | ETD Website |
Appendix B: TATM Degree Related Course Offerings**
- *TT503 – Materials, Polymers and Fibers used in Nonwovens
- *TT504 – Introduction to Nonwovens Processes and Products
- *TT505 – Advanced Nonwovens Processing
- *TT506 – Bonding Principles in Nonwovens
- *TT507 – Nonwoven Characterization Methods
- TT508 – Nonwoven Product Development
- *TT 520 – Yarn Processing Dynamics
- TT 520L – Yarn Processing Dynamics
- *TT 521 – Filament Yarn Production Processing and Properties
- TT 521L – Filament Yarn Production Processing and Properties
- TT 530 – Textile Quality and Process Control
- TT 532 – Evaluation of Biotextiles
- TT 533 – Lean Six Sigma Quality
- *TT 550 – Production Mechanics and Properties of Woven Fabrics
- TT 550L – Production Mechanics and Properties of Woven Fabrics
- *TT 551 – Advance Woven Fabric Design and Structures
- TT 551L – Advance Woven Fabric Design and Structures
- TT 570 – Textile Digital Design and Technology
- TT 571 – Professional Practices in Textile Design and Technology
- TT 581 – Technical Textiles
- TT 591 – Special Studies in Textile Technology
- TTM 501 – Textile Enterprise Integration
- TTM 510 – Apparel Technology Management
- TTM 510L – Apparel Technology Management
- TTM 515 – Apparel Production
- TTM 517 – Advanced Computer-Aided-Design for Fashion
- TTM 530 – Textile Quality and Process Control
- *TTM 531 – Total Quality Management in Textiles
- TTM 533 – Lean Six Sigma Quality
- TTM 535 – Research Methods and Management (Master of Science only)
- *TTM 561 – Strategic Technology Management in the Textile Complex
- TTM 573 – Management of Textile Product Development
- TTM 579 – Textile Design Collection Studio
- TTM 580 – Consumer Perspectives in Fashion
- *TTM 581 – Global Textile and Apparel Business Dynamics
- TTM 582 – Global Textile Brand Management and Marketing
- *TTM 583 – Strategic Planning for Textile Firms
- TTM 585 – Market Research in Textiles
- TTM 588 – Global Perspectives in Textile Supply Chain Management
- TTM 587 – Advanced Fashion Collection Studio
- TTM 591 – Special Studies in Textile Technology Management
*Denotes courses also offered via distance education
**Not all courses are offered every semester. For a complete listing of current course offerings, see Registration and Records.
Appendix C: Research Interests of TATM Graduate Faculty
Dr. Kate Annett-Hitchcock, Professor
Creative design of usable, aesthetically interesting and market-appropriate clothing for global consumers, using historical and cross-cultural examples as inspiration. Develop products that improve the quality of life by providing, promoting and maintaining health and well-being.
Dr. Lisa Chapman, Professor and Director of Graduate Programs
Research objectives are to determine how digital technologies such as integral knitting, ink jet printing, CAD for woven, knit and print design, simulation, and digital libraries can be used to bridge the design and manufacturing processes, reduce the cost and time needed for product development, and improve the sustainability of textile products.
Dr. Blanton Godfrey, Professor
Research interests include business management and new product development, statistical graphics, quality and productivity management, strategic planning and deployment, experimental design, reliability, data analysis, and applied statistics.
Dr. Helmut Hergeth, Associate Professor
Strategic Costing and Planning in Textiles (costing/pricing strategies and economic sustainability, globalization issues in cost management). Textile Technology Management and Knowledge Management (e.g., technology road mapping). Management Education in Textiles (Finance, experiential learning, Business Visualization, etc.)
Dr. Chanmi “Gloria” Hwang, Associate Professor
My research program focuses on sustainable and inclusive apparel design and product development using advancements in digital technology. As a design researcher, I utilize the shared pragmatic viewpoints of research (quantitative and qualitative approaches) and creative practices (technical pattern making and virtual prototyping) to solve practical design problems. Thus, my research results in both physical and digital wearable artifacts and manuscripts.
Dr. Byoungho “Ellie” Jin, Professor
Dr. Jin’s research interests center on fashion brands’ internationalization, branding, consumers and retailing in emerging markets, and cross-cultural consumer and retail studies.
Dr. Traci Lamar, Professor
Investigation of textile product design; design and development processes, and creation of new fabrics and products; development of textile products including process modeling, and use of technologies such as CAD, electronic knitting, simulation and digital textile printing.
Dr. Karen K. Leonas, Professor
Protective apparel material design and development specifically for resistance to small particle and liquid penetration including surface and chemical modifications of polymeric materials and medical textiles; Polymer and textile weathering and degradation; and Sustainable practices throughout the supply chain.
Dr. Kavita Mathur, Associate Professor
Healthcare textiles, research promoting health and wellness, wearable technologies, sustainable fashion, refashioning textile waste, upcycling design for reuse applications, material innovation, color and woven textile design, smart textiles design; which includes functional and interactive textile solutions for home and apparel. Performance textile design inspired by nature (biomimicry), bridge other areas of design such as digital communications, sustainable design practices, smart materials and technologies.
Dr. Delisia Matthews, Associate Professor
With 8 years of experience in the marketing research and retail industries, Dr. Matthews’ research interests include consumer behavior, branding, retailing and fashion consumer groups.
Dr. Marguerite Moore, Professor
Data Mining for Consumer Insight, Country of Origin and Brand Origin in Global Markets.
Kate Nartker, Assistant Professor
Jacquard weaving, Surface Design, design and garment construction.
Dr. Anne Porterfield, Associate Professor
Use and implementation of 3D Apparel Simulation and Virtual Fitting, Customization, Specialized garments for performing artists.
Dr. Abdel-Fattah M. Seyam, Professor
Healing performance of bio-based polymers; Smart textiles; Formation of composites and their performance evaluation; shaped seamless woven garments; protection of high performance fibers from UV radiation; Static generation and suppression of textile surfaces.
Dr. Minyoung Suh, Associate Professor
Utilizing advanced technologies, such as digital conductive printer, pressure sensor, 3D body scanner, pressure sensor, and motion capture system, current research ranges over topics related to the performance and comfort of functional apparel products, including smart clothing, sportswear, foundation garment, and intimate apparel.
Dr. Kristin Thoney-Barletta, Professor, Director of Undergraduate Programs, Associate Department Head
Textile Supply Chain Modeling, with an emphasis on Scheduling, Inventory Optimization, forward and reverse (Recycling) Supply Chain Logistics, and making Sourcing decisions including Re-shoring
Dr. Andre West, Associate Professor and Director of Zeis Textiles Extension
Study of trends and technology encompassing these trends, relating to the manufactured apparel/fashion industry and the education of that industry. Incorporation and analysis of technology to predict or track fashion industry change.
Janie Woodbridge, Assistant Professor
Woven design, smart textiles and performance textiles.
Dr. Yingjiao Xu, Professor and Director of Ph.D. Graduate Programs
Market analysis from consumer behavior perspective, recent work focusing on consumer behavior in the Chinese market, luxury fashion consumption, and innovative fashion retailing.