A. Deaton

A. Deaton

Special Projects Director, TPACC

Textile Protection and Comfort Center

Wilson College Directory
Jump To:

Publications

Effects of environmental temperature and humidity on evaporative heat loss through firefighter suit materials made with semi-permeable and microporous moisture barriers
Gao, H., Deaton, A. S., Fang, X., Watson, K., DenHartog, E. A., & Barker, R. (2021, July 22), TEXTILE RESEARCH JOURNAL. https://doi.org/10.1177/00405175211026537
Comparative studies on standard and new test methods for evaluating the effects of structural firefighting gloves on hand dexterity
Barker, R. L., Ross, K. A., Andrews, J., & Deaton, A. S. (2017), Textile Research Journal, 87(3), 270–284. https://doi.org/10.1177/0040517516629143
Fluid replacement advice during work in fully encapsulated impermeable chemical protective suits
Rubenstein, C. D., DenHartog, E. A., Deaton, A. S., Bogerd, C. P., & DeKant, S. (2017), Journal of Occupational and Environmental Hygiene, 14(6), 448–455. https://doi.org/10.1080/15459624.2017.1296230
Variability in heat strain in fully encapsulated impermeable suits in different climates and at different work loads
DenHartog, E. A., Rubenstein, C. D., Deaton, A. S., & Bogerd, C. P. (2017), Annals of Work Exposures and Health, 61(2), 248–259. https://doi.org/10.1093/annweh/wxw019
Variability in heat strain in fully encapsulated impermeable suits in different climates and at different work loads (vol 61, pg 248, 2017)
DenHartog, E. A., Rubenstein, C. D., Deaton, A. S., & Bogerd, C. P. (2017), Annals of Work Exposures and Health, Vol. 61, pp. 267–267.
A method for determining off-gassing of protective fabrics exposed to simulated flash fire conditions
Bradham, A., Thompson, D., Barker, R., Morton-Aslanis, J., & Deaton, A. S. (2013), AATCC Review, 13(6), 57–65.
Developing a thermal sensor for use in the fingers of the pyrohands fire test system
Hummel, A., Barker, R., Lyons, K., Deaton, A. S., & Morton-Aslanis, J. (2012), American society for testing and materials special technical, 1544, 176–187. https://doi.org/10.1520/stp104207
Factors influencing the uptake rate of passive adsorbent dosimeters used in the man-in-simulant-test
Ormond, R. B., Barker, R., Beck, K., Thompson, D., & Deaton, S. (2012), American society for testing and materials special technical, 1544, 247–265. https://doi.org/10.1520/stp104205
Interlaboratory study of ASTM F2731, standard test method for measuring the transmitted and stored energy of firefighter protective clothing systems
Deuser, L., Barker, R., Deaton, A. S., & Shepherd, A. (2012), American society for testing and materials special technical, 1544, 188–201. https://doi.org/10.1520/stp104211
Translation between heat loss measured using guarded sweating hot plate, sweating manikin, and physiologically assessed heat stress of firefighter turnout ensembles
Ross, K., Barker, R., & Deaton, A. S. (2012), American society for testing and materials special technical, 1544, 27–47. https://doi.org/10.1520/stp104510

View All Publications

Areas of Expertise